KIP Printer Repair Near Me

KIP printers operations

---

- Turning on the Printer
- Turning off the Printer
- Replacing Roll Media
- Replacing Toner Cartridge
- Placing Cut Sheet Media
- Copying (MFP Model)
- Stop of Scan or Copy (MFP Model)
- Dehumidifying Roll Media

KIP Printers

---

• KIP 700 C SERIES
• KIP 900 C SERIES
• KIP 71 G SERIES
• KIP 75 G SERIES
• KIP 79 G SERIES

Paper Jam

"xxxx Mis-feed” is displayed in the UI screen when the media is jammed. Be careful not to get paper cuts on your hand. Gently remove a jammed paper. When it does not reach Fuser Unit, toner on it may spill off. If toner gets into eyes or your mouth, immediately rinse them with water and contact a doctor. Gently remove a jammed paper. When it does not reach Fuser Unit, toner on it may spill off on your cloth. Dust off your cloth. Use cold water to wash in out. Using hot water may leave a stain.

Roll Deck Section Jam

- Pull the lever to unlock the Roll Deck. Draw out the Roll Deck.Br /> - Rewind the roll media.
- Insert the leading edge of the roll media under Guide Plate until it touches the feeding roller. Rotate Feed Knob clockwise so that the feeding rollers catch the leading edge.

KIP Scanners

• 720 S
• 2300 S

It is recommended to clean Original Glass, Platen and Feeding Rollers once a week or as needed. Dirt of these parts may result in the image problem or getting dirt on the scan original.
Wipe the entire white part of the Platen with a soft cloth with a little water (or with neutral detergent) first, and wipe it with a dry soft cloth.
Wipe the Feed Rollers with a soft cloth with a little water (or with neutral detergent) first, and wipe it with a dry soft cloth.